Learning to Become an Engineer

When I was eleven years old, I was very lucky to have many engineers from the New York Central take me in the cab with them for train rides. Going east I rode the head end from North White Plains to New York City and went west as far as Chatham, New York in Duchess County. Today I can talk about it because none of the men I rode with can get fired for letting a kid in the cab. Sad to say, many of them have passed away and have gone off to Heaven where the trains never break down, all signals are clear and all the jobs work days with weekends off. Some of the jobs even pay overtime.

However, my story today is not about those men that were great to me as a kid. It’s about a special engineer that I fired for on the New Haven line. Back in 1973 I was lucky enough to be the firemen on NU-2, UN-1 with Norris Myers. We had a very good train crew. John Molyneux was the conductor, Bernie Sullivan was our head end brakeman and Eddy Sapinski was our flagman. Without a doubt they were one of the best crews I had the privilege of working with. This train crew could really make the best out of one work-horse of a job.

We reported at 8:00 P.M. at Cedar Hill engine house. We would go out and put our grip on the power and I would check out to make sure everything was ok on our three units. After a call to the yard master we would head for our train in the “departure yard.” While we were pumping air for our break test, our conductor would be making his calls. When we left, we knew just what we would do at all our stops the rest of the night. I mention this because later I worked with train crews that left much to be desired.

Read more
9 Comments

The Laboratory 
and the Outhouse

Back in 1980, the member railroads authorized the Association of American Railroads (AAR) to conduct testing of locomotives to study diesel exhaust emissions. The Research & Test Department was allocated a budget to develop a mobile testing lab that could be taken to railroad facilities to measure fuel and air flow inputs and emissions and power outputs of locomotives. Our test plan was to select locomotives that had recently been overhauled and compare their emissions of nitrogen oxides, particulate matter, hydrocarbons, carbon monoxide, and sulfur dioxide to locomotives of a similar make and model that were at the end of their useful lives, just prior to overhaul.

The R&T Department had offices in Washington, D.C., where I was located, and in Chicago on the campus of the Illinois Institute of Technology. The Chicago office conducted a great deal of testing in support of the AAR’s Mechanical Standards and had much useful equipment available. We converted a motor home they had into the new mobile lab and worked with a contractor that was experienced in measuring emissions from fixed facilities like power plants. Bench-work and equipment racks were designed and installed, measurement equipment purchased, computers acquired, (which we had to learn how to use—remember, this was 1980), and an array of other equipment obtained and outfitted. This is a little story about the creativity and ingenuity of some of the railroad people who actually made it work.

Read more
5 Comments

Editor’s Notebook

The Center for Railroad Photography & Art has announced the publication of a new book, The Railroad and the Art of Place An Anthology. Featuring the work of twenty-five contemporary photographers as well as a selection of historic photographs from the 19th and 20th centuries, the book is a rich and evocative exploration of the railroad’s impact on the visual and cultural landscape of America.

This book is inspired by and expands upon the theme introduced by David Kahler in his earlier work, The Railroad and the Art of Place, which we reviewed in 2016 and you can read here.

This video is a recording of a panel discussion that presents an overview of the book including a selection of images and a discussion of the concepts that underlies the “art of place” and how these ideas shaped the work. I was honored to have a small role in the creation of the book and to be included among the panelists.

The Railroad and the Art of Place An Anthology is available for pre-order (click here) and will begin shipping on November 1st.

Read more
Comments Off on Editor’s Notebook

A Shoot in the Dark: 
One Night in Connecticut

The Connecticut Eastern Railroad Museum
2019 Night Photo Shoot

The look on the face of the Cumberland Farms cashier was priceless, in the split second before she burst into laughter. My strong Appalachian drawl, in asking her how she was doing, had caught her off guard, yet she found it hilarious. “Thank you, I needed that,” she said, still laughing, ringing up two bottles of water and a Gatorade. Her work shift must have been a rough one. I found myself in this Willimantic, Connecticut convenience store on the sultry evening of a late September day, in town for the Connecticut Eastern Railroad Museum Night Photography Session. 

The Connecticut Eastern Railroad Museum Night Shoot, a fundraiser for the organization, is an annual event, and I would be partaking in the 16th such happening. Since its inception, the Night Photo Shoot at CERM has been organized and directed by well-known New England photographer Tom Nanos, and this would be no exception. The event serves as a fundraiser for the museum. After years of promising (or threatening, depending on your perspective) that I would attend, the stars finally aligned, and I made the long trip to the Nutmeg State from my Appalachian home. 

My trip to the CERM Night Photo Session would be a quick and ambitious one (taking place entirely over the course of a 3-day weekend). This was what my mother would’ve called a “flying trip.” Barry Manilow’s syrupy sentimental “Weekend in New England,” this was not to be. 

My adventure began with a drive to the Richmond, Virginia area, where I would overnight before a long ride north on Amtrak the following day. I arrived on the old Richmond, Fredericksburg & Potomac mainline (an old haunt of mine) at rural Rixey, Virginia, in Caroline County, around 3 pm. Rixey was hot and dusty and country quiet, with more than a hint of fall in the air and on the trees. I was immediately presented with a rolling headlight meet between Amtrak’s northbound Carolinian and a southbound CSX ballast train. After a few more shots around Ashland, Virginia, I headed for dinner at a Vietnamese restaurant and then my hotel. 

An Encounter at Rixey”
Amtrak’s northbound Carolinian has a rolling meet with a southbound ballast train at rural Rixey, Virginia on the Richmond, Fredericksburg & Potomac.

Saturday morning dawned early for me. My train, Northeast Regional 164, departed the Virginia capital at 6:35 am. I was “up and at ‘em” by 4 am, swinging by the nearest Sheetz for breakfast and to pick up snacks and drinks for the long train ride ahead. Directly, I was at Richmond’s Staples Mill Road station, a busy, utilitarian 1975-built structure along the RF&P main line outside the capitol city itself. In the muggy morning air of the outdoor waiting area, I found my train, 164, and Northeast Regional 82, lined up and ready to head north.

Trains 164 (left) and 82 at Richmond, Virginia; September 28, 2019.

Aboard the train, I settled in, and inflated the pillow from my Amtrak “Passenger Comfort Kit” in anticipation of a nap that I knew I wouldn’t take. The conductor moved through the coach, checking tickets with his handheld terminal. Clicking on mine, he said softly, so as not to disturb the morning quiet in the car, “Change at New Haven,” in the grand old tradition. Moments later, 164 was in motion, gently gliding north through Greendale Interlocking on an “Approach Limited” signal, and then out onto the mainline of the RF&P. 

The train ride was business as usual, nothing out of the ordinary, the engine swap from P42DC to ACS-64 at Washington accomplished with such precision it might have seemed like sleight-of-hand, were it not for the brief moments when the Head End Power (HEP) was off. The Northeast Regional makes short work of the electrified haul up the Northeast Corridor, but as we departed New York City and rolled out onto the New Haven’s majestic Hell Gate Bridge, I was becoming concerned, and the farther north we went, the more it felt to me that we were behind schedule.  The dash seemed to have turned into a slog. Would I still be able to make my connection in New Haven?

I needn’t have worried. As it turned out, 164 ended up being only 5 minutes late into New Haven, and the Shuttle was itself a few minutes behind, so I made my connection with no problem, although there was a bit of anxiety for a while. Aboard the Shuttle, I ended up sitting “backwards” as the push-pull 2-car train, shoved by a P42DC, blasted off and ran at blistering speeds across south-central Connecticut. 

After a 7-minute late arrival and a quick walk across the street from Hartford Union Station, I was installed in my hotel. I freshened up and changed, then went to the lobby to wait for Tom Nanos, who had generously agreed to give me a ride to the museum. The car ride from Hartford to Willimantic was quick, and Tom and I used the time to catch up.

At last, after hundreds of miles by road and by rail, I arrived at the Connecticut Eastern Railroad Museum, a trim, neat facility, somewhat wedged in between the Willimantic River and the tracks of the New England Central. The humidity had become heavy, and stepping out of the car was like being slapped across the face by a gigantic wet hand. 

CERM revealed itself to have an eclectic, regionally appropriate collection which includes New Haven, Central Vermont, and Rutland equipment along with a smattering of industrial switchers. The centerpiece of the facility is the Columbia Junction roundhouse, a replica of the 1892 structure, rebuilt to the original plans and on the original foundation. I was quickly introduced to many of the museum’s docents and volunteers, as well as several photographers who were participating in the photo shoot. Everyone was so friendly and outgoing, it was easy to forget I was the only one there who spoke without an accent. 

While Tom had been at CERM earlier and planned the shots for the night, there was still the actual business of setting them up. The execution would involve a degree of manual labor, and I’d volunteered to help with this work in a token exchange for the ride from Hartford to the museum. This included the unloading and schlepping around of industrial strength tripods that seemed to be made from iron pipe, along with light units and remote triggers and batteries and cables. At one point during the night, Tom asked if I’d carry his camera from one spot to another; I felt like I’d been entrusted with the crown jewels of some exotic kingdom. I did as he asked, but it made me nervous; I decided that were I to stumble in the darkness, I’d deliberately throw my own camera to the ground in a sacrifice to save Tom’s, although I wasn’t at all sure how I’d accomplish that if it actually became necessary.

Photographer Thomas J. Nanos setting up his night photography equipment.

In those carefree days before COVID-19, the threat of the mosquito borne “EEE” (Eastern equine encephalitis) was in the air, literally and figuratively, and the cologne of the night was a cloying combination of DEET, permethrin, and, given the heat, sweat. Heady stuff. I was particularly concerned about EEE, and my application of permethrin was akin to slathering myself with lard, like some Southern-fried dish, of which I suppose I was.

As twilight closed in, the anticipation grew, and finally, the shoot began. Some in attendance made up a rowdy devil’s brigade, boisterous and exuberant, while others were quiet and reserved, almost solemn. There was an interesting mix of railfans and non-railfans, the serious and the curious. Yet all were clearly enjoying themselves, and the evening seemed to become electric and dramatic, something special and memorable unfolding right before our very eyes.

Night Trick”
The first shot of the night was Central Vermont S-4 8081 posed with CERM’s replica gallows signal.
The gallows signal drops from “clear” to “stop” in a short time exposure.
Stevedore”
CERM docent Jeff Laverty unloads a Grand Trunk Western boxcar.

Tom kept the shoot moving, personable yet professional, amply demonstrating his night photography skills, for which he is known. The CERM docents and volunteers were patient and understanding, some willing to freeze into position for uncomfortable periods of time so as not to blur long time exposures.  Photographer Mark Spremulli had brought an incredibly powerful flashlight, shining it on the subject matter at hand and making it easier for the rest of us to focus our cameras.

CERM docent Jeff Laverty is stock still as he strikes this classic pose aboard Rutland caboose #40.
Door Men”
Bob Hassett (left) and another CERM volunteer seem locked in time as they simulate work on Baldwin 0-4-0 #10.
Crawl Space”
CERM volunteers replicate work inside #10’s smokebox.

At one point, I eschewed the “official” goings-on at the roundhouse and stumbled around in the pitch to get a shot of New Haven FL9 2023 (originally NYNH&H 2057) using only ambient light from a nearby business.

McGinnis”
An unofficial grab shot of New Haven/CDOT FL9 2023.
Pit Maneuver”
Central Vermont caboose 4052 is posed on the turntable outside the Columbia Junction roundhouse.

The “grand finale” for the night was provided by CERM volunteer Rich Cizik, Jr., who wielded a blowtorch against scrap steel on the frame of an old flatcar, the resulting shower of sparks and slag like celebratory fireworks.

Fireworks Finale”
CERM’s Rich Cizik, Jr. does a bit of blowtorch work to close out the night photo session.ratory fireworks.

With the spectacular spark show done, the 16th annual Connecticut Eastern Railroad Museum Night Photo Shoot was at an end. Just over three hours had passed, but it sure didn’t seem like it; the time had gone by way too quickly. As the gathered began to slowly disperse, I said goodbye to many new friends, and then set about helping Tom with the break down and loading of his equipment. Tom, photographer Fred Guenther and I then retired to the nearby Willimantic Brewing Company for a late dinner.

The next morning, I was back at Hartford Union Station, sitting on a bench on the nearly deserted platform, eating a Dunkin Donuts breakfast while waiting for the Shuttle back to New Haven. From New Haven, it was Northeast Regional 195 back to Richmond. I thought 195 was crowded until our stop at New York Penn Station, when the boarding call was followed by a cascading wall of humanity down the escalators, not unlike the iconic elevator scenes in Stanley Kubrick’s 1980 horror film The Shining. After Washington, though, the crowd thinned considerably, and the final lap to Richmond was relaxing and carefree, in perfect keeping with the rural quality of much of the RF&P.

Amtrak “Shuttle” train 405 departs New Haven, Connecticut on the morning of September 29, 2019.
Now Arriving, New Haven”
The author’s train, 195, arrives at New Haven. The two P42DC diesels, which have led the way from Boston, will be removed here, replaced by an ACS-64 electric locomotive for the run to Washington, DC.

Detraining at Richmond, I realized that 91, the southbound Silver Star, was due right behind us, so I lingered on the station patio and made a few shots of the Florida-bound streamliner. With that, I decided I’d had quite enough trains for one weekend, and I collected my car and made the long drive home. Driving west into the descending twilight of a Virginia evening, jamming out to the Ting Tings’ “Shut Up and Let Me Go,” or Molly Hatchet’s “Flirtin’ With Disaster,” I was filled with the unmistakable feeling that an epic experience was coming to an end.

Standing alongside Viewliner sleeper “Catawba River,” the conductor of Amtrak train 91, the southbound
Silver Star, checks his manifest at Richmond, Virginia, September 29, 2019.

My trip to the CERM Night Shoot was certainly an adventure, one that will not soon be forgotten. It was well worth it, and I’d do it again in a heartbeat. I heartily recommend the event to anyone interested in night photography, whether interested in trains or not.

The 2021 Connecticut Eastern Railroad Museum Night Photo Shoot will be held October 2, 2021, beginning at 6:30 pm. Reservations are required, and attendance is limited and typically sells out quickly. For more information or to lock in your attendance, email Tom Nanos at tom@nanosphoto.com

Find out more about the Connecticut Eastern Railroad Museum by visiting http://www.cteastrrmuseum.org/

Eric Miller Photographs and text Copyright 2021

7 Comments

The One That Looks Like a Bullet

Most railfans, at some point or another, are asked what their first train sighting was. For me, I can’t remember the first time I saw a train, but I do remember the first time I took a picture of a train. May 16, 2010 was the date. The event was the annual Railroad Days festival held in Homewood, Illinois.

Railroad Days, located in downtown Homewood near the entrance to Canadian National’s (CN) bustling Markham Yard, has been held every year since 2004 (except 2020 due to the pandemic). It’s the town’s way of celebrating their 150+ years of being a major railroad hub. Model train displays, vendors, rides on the CN’s little “train on tires” that drives around a parking lot adjacent to the yard, and lots of railfanning make up the special day.

For seven-year-old me, this was something exciting beyond belief, and in all likelihood, I did not get any sleep the previous night as I eagerly awaited for my dad to get up and take me to Homewood. When we finally got there, we first checked out the model train displays. I talked my dad into getting me an HO scale locomotive for my rapidly expanding model collection, and then we headed over to the then new Homewood Railfanning Platform, located near the Amtrak station, to watch some trains before heading home.

Read more
1 Comment

Editor’s Notebook

Memory and Loss

I watched the sun and clouds race across the mountains while I tried to decide if conditions were favorable for photography on this Sunday afternoon in January, 2020. Time was already short when I finally picked up my camera bag and headed out the door.

Harrisonburg, Virginia is across the Blue Ridge in the Shenandoah Valley. The Orange, Alexandria and Manassas RR reached Harrisonburg in 1868. The town was an important industrial center in the northern Shenandoah Valley and over the years was served by numerous railroads including the Baltimore & Ohio, Southern and Chesapeake Western. Norfolk Southern has a presence in Harrisonburg and the Shenandoah Valley Railroad operates the line from Staunton, Virginia to Pleasant Valley, just south of Harrisonburg. The history of the railroad in Harrisonburg is written in a stretch of tracks through a faded industrial landscape just west of downtown.

Read more
7 Comments