Demise of the New River Bridge

New River Bridge - Glen Lyn, Virginia - April, 1968
New River Bridge – Glen Lyn, Virginia – April, 1968

The former Virginian Railway bridge over the New River at Glen Lyn, Virginia was perhaps one of the most spectacular railroad crossings constructed at that time. Designed in 1906 by the Tidewater Railway, the bridge was completed in 1909 after the new Virginian Railway was formed by merger of the Tidewater with the Deepwater Railway which was building eastward from its namesake town in West Virginia. Both the Deepwater and the Tidewater railways were constructed by financier Henry Huttleston Rogers. After the Chesapeake & Ohio and the Norfolk & Western railways refused to give the little Deepwater favorable rates for shipping coal from the mines in southern West Virginia,  Rogers quietly incorporated the Tidewater railway to build westward from Norfolk to the West Virginia state line. In 1907 the Tidewater name was changed to the Virginian Railway (reporting mark VGN) and at the same time the Deepwater Railway was acquired by the VGN. There was a gap between the former roads until 1909 when the “Golden Spike” was driven close to the WV-VA state line which was located about the middle of the bridge over East River.

The four concrete piers in the New River which made up the main part of the bridge stood nearly 90 feet high from the river bottom and with the addition of the steel deck truss, it made the bridge about 120 feet tall to the top of the rail. The total length of the bridge was 2,155 feet. This bridge and the equally tall but much shorter bridge over East River about a half mile west of Glen Lyn were the last bridges constructed that opened the way for trains to move the whole length of the railroad.

New River Bridge - Glen Lyn, Virginia - April, 1968
New River Bridge – Glen Lyn, Virginia – April, 1968

When the states of Virginia and West Virginia decided to widen US 460, the 10 mile stretch of the former Virginian from Kellysville, West Virginia to Narrows, Virginia was acquired by the respective state’s highway departments. The connection track, built by the Norfolk & Western Railway at Kellysville in 1960 after the Viginian merger, was reconfigured and a new connection to the former Virginian Railway at Narrows was built over the New River in 1970. Most of the old right of way was used for the new US 460 except the New River and East River crossings. Since these bridges became isolated and served no purpose, they were torn down. Today the massive concrete piers in the New River serve as a reminder of this once mighty structure.

View of the concrete piers

Doug Bess – Photographs and text Copyright 2016
See more of Doug’s work at WVRails.net

Strong Arm Tower

The author, age 14, in the New York Central Strong Arm Tower #1 in 1948
The author, age 14, in the New York Central Strong Arm Tower #1 in 1948

In 1948, when I was 12 years old and was a very avid railroad fan, I would spend Friday evenings at the New York Central Strong Arm Tower #1 in Mott Haven Passenger yards in the Bronx NY. The tower man, Mr. Bill White, taught me how to operate the machine and how to control the switches and signals that controlled the 5 double track diamonds that crossed the north & south wyes and the 5 leads to one of the largest passenger car yards in the U.S. I used all the railroading that I accumulated in my teens to eventually hire out on the New Haven RR as a tower man in 1956.

Mr. Bill White, 2nd Trick Operator in 1948
Mr. Bill White, 2nd Trick Operator in 1948
Tower #1, looking east
Tower #1, looking east

The “RUT Milk ” freight train ran from the NYC RR West Side freight yards to DV Tower at Spyten Duyvil where it came south on the Hudson Division to Mott Haven yards and there crossed the yard leads and entered the Harlem Division tracks for Brewster, Pleasantville and Chatham NY. There it was turned over to the Rutland Railroad for its final leg to Eagle Bridge NY and then to Rutland VT.

Zolinsky_3
The “RUT Milk” on the east wye at Tower 1, Mott Haven

Victor Zolinsky – Photographs and text Copyright 2016

Bugilbone Siding

Bugilbone-Siding

In the north-west of the Australian state of New South Wales, several branch lines were built in the 19th and early 20th centuries to open up sparsely populated regions. Built to serve rural communities they survived mostly on outward shipments of grain plus whatever else the local population consigned to the rails. The line to Walgett was opened by 1908, and its value ebbed and flowed with each successive crop. Some years were good, and some were not, but as with many such lines the world over, less and less freight went by rail and ultimately the line closed. The line to Walgett is still open though, although in this case, the only trains to run this far out on the branch are unpredictable grain trains.

I found myself in that country for the first time over Easter in 2013 and, with information a grain train was loading at Walgett wheat terminal, took the two hour drive from Narrabri to go and investigate. As it happens, there was no train on the line that morning, but I did find this remnant of the station at the oddly named Bugilbone Siding. Opened in 1905 and closed 70 years later, even in its heyday it was no more than a loop*, a simple shelter and this loading bank. By the time I drove past, the loop had been lifted so the loading bank was not only disused, but literally removed from the line it once served. From memory, there was almost nothing else to be seen at Bugilbone Siding, and why someone felt the need to paint its name on the edge of the loading bank is a mystery, but it did stand out on the otherwise flat and empty plains.

*Australian rail terminology is based on the English, with US-style terminology becoming more common in say the last 30 years or so. So we refer to a loco driver rather than engineer, sleepers rather than ties and so on. We would normally refer to a siding as a stub track (i.e. access from one end only) while a loop would have access from either end.. At Bugilbone, since it had access from either end, we call it a loop.

Alan Shaw – Photograph and text copyright 2016
See more of Alan’s work on his Flickr page

Redstone Bridge

Nestled in the heart of South Central Minnesota lies the German influenced town of New Ulm. This town was founded in 1854, and the Chicago & North Western Railway arrived in late 1871. New Ulm became a significant station point for the C&NW, and included a crossing of the Minnesota River. By 1899, a line relocation made the river crossing redundant, and the original mainline was reduced to a branch. The line was purchased by the Dakota, Minnesota & Eastern Railroad in 1986; which was in turn purchased by Canadian Pacific Railway in 2008.

47914-2
Looking east across the Redstone Bridge

The Redstone Bridge lies just east of New Ulm, along the original mainline. It is named after the town of Redstone, a long lost town along the banks of the Minnesota River. The bridge is hard to access, but is a treat for anyone that visits. A serene and quiet spot surrounds this very historic swing bridge, which is a little known secret. The bridge was originally built in 1880 to replace a wooden swing bridge. The bridge was built under the direction of the Chicago & North Western Railway, with the Leighton Bridge & Iron Works of Rochester, New York erecting the structure.

Overview of swing span
Overview of swing span

The center swing span is a 206-Foot-long Iron Swing Span, of Camelback Through Truss construction. The span is set on iron rollers, on top of a round stone pier. The span uses a unique system of U-Bolts to hold the structure together. The swing system is still fully intact.

U-Bolt Connection
U-Bolt Connection

The swing span is approached on either side by a 130 Foot Quadrangular Through Truss, of iron construction. This design is exceedingly rare in certain parts of the United States, although it is very common along former C&NW lines. Post Tension Rods connect pieces on these spans, allowing for heavier loads with less material.

The West Approach Truss
The West Approach Truss

In addition to the main through trusses, the bridge also has a wooden trestle approach. Stone piers are also used for the trusses, although all but one has been encased in concrete. Presently, the bridge serves a quarry to the east. Various agencies hope that if abandoned, this highly significant bridge can be preserved in the form of a trail. Access to it is walk in only, from 171st Avenue.

The bridge serves as a reminder to a past time, when riverboats and trains crossed paths. While the Minnesota River became non-navigable this far upstream in 1884, the bridge undoubtedly had to swing at least once. The bridge also serves a reminder of the heritage of the community of New Ulm, which was brought up along the railroad. With an excellent retention of historic integrity, the bridge is commonly regarded as one of the most significant railroad bridges in the State of Minnesota. Despite its relatively unrecognized status, the bridge is also one of the more significant railroad bridges in the United States. Hopefully it can retain this status through preservation for years to come.

John Marvig Photographs and Text Copyright 2016

See more of John’s work at John Marvig’s Railroad Bridge Photography

Built to last

One hundred years ago, when airplanes had just been invented, and automobiles were not affordable for most people, transportation in the growing United States was provided mostly by railroads. One of the busiest and most successful was the New York, New Haven, and Hartford Railroad. The New Haven reached throughout Connecticut, Rhode Island, Massachusetts, and parts of New York State. New England’s factories were busy manufacturing goods for most of the country, and shipping raw materials in and finished products out made the New Haven a prosperous and growing business.

Traffic demand between New Haven and New York grew to the point that the railroad decided to invest in two infrastructure improvements. The first eliminated grade crossings by elevating or depressing the tracks through populated areas between New Haven and Mount Vernon. From there, trains ran down the New York Central tracks into Grand Central Terminal. The second improvement was to electrify the four track main line, which was completed in 1907 between Mount Vernon and Stamford, and extended to New Haven in 1914. The New Haven’s innovations resulted in the first commercially successful, large scale electrified railroad in the world.

A key location in the system was Stamford, Connecticut. The New Haven operated a robust commuter railroad service with frequent trains serving the towns along the new tracks, which quickly expanded the suburbs of New York City, making it possible for commuters to return home after work in the City with ease and in relative comfort.

Stamford, Connecticut - 1966
Stamford, Connecticut – 1966

This photo was taken in summer of 1966. The view is from the eastbound platform at Stamford, facing west. The overhead wires are the New Haven’s innovative design using a triangular structure which held the catenary wires in a fixed position over each of the four tracks. In the left background, an express passenger train, powered by an EP-5 class locomotive, is just coming into view around the curve and is about to pass under the semaphore signal displaying “Medium Clear”. The engineer has reduced speed to 30 mph, and shortly his train will clatter over the switches, set to crossover from track 2 to track 4, and make the station stop.

On the right, the signal semaphores controlling westbound traffic are set for “Clear” on track 3, allowing the next “Stamford Local” to depart on time and make all stops to Mount Vernon and on to GCT. The three boys at the end of the platform are enjoying mainline passenger railroading up close.

In the next fifty years, there will be many improvements to the New Haven. High level platforms, modern cab signaling, a superior lightweight catenary system, new locomotives and new commuter cars, and modern electronic systems will make the commuters’ journey more frequent, more comfortable, and more reliable. Today the system is still providing the service it was designed to do by the forward thinking managers of the New Haven Railroad one hundred years before. It was built to last, and it has.

logo-1960-new-haven-railroad

Bob HughesPhotograph and text copyright 2016

Santa Fe Depot

The San Diego, CA, station was built by Santa Fe in 1915 and was the terminal for the railroad’s San Diegans until Amtrak took over in 1971. Passenger trains of SP’s San Diego & Arizona Eastern also originated here from 1919 to 1951. Today it is the terminal for Amtrak, Coaster, and several lines of the San Diego Trolley.

Santa Fe Depot - San Diego, California - September, 1970
Santa Fe Depot – San Diego, California – September, 1970

The Mission Revival architecture includes interesting tile work.

Santa Fe Depot - May, 2010
Santa Fe Depot – May, 2010

Gordon Glattenberg – Text and photographs Copyright 2016